Page 17For technical questions, please call 1-888-866-5797.ITEM 58169
SAFETYSETUPOPERATIONMAINTENANCE
Cleaning, Maintenance, and Lubrication Schedule
Note: This maintenance schedule is intended solely as a general guide. If performance decreases or if
equipment operates unusually, check systems immediately. The maintenance needs of each piece of equipment
will differ depending on factors such as duty cycle, temperature, air quality, fuel quality, and other factors.
Note: The following procedures are in addition to the regular checks and maintenance
explained as part of the regular operation of the engine and equipment.
Procedure
Before
Each
Use
After
Each
Use
Monthly or
every 20
hr. of use
Every 3 mo.
or 50 hr.
of use
Every 6 mo.
or 100 hr.
of use
Yearly or
every 300
hr. of use
Every
2 Years
Brush off outside of engine
Check engine fuel/oil mixture level
Check for loose hardware
Check/adjust idle speed
Clean debris from Tine
Blades and Shaft
Clean air filter
*
Check sediment cup
Check and clean spark plug
1. Clean fuel tank, strainer
and carburetor
2. Clean carbon build-up from
combustion chamber
** **
Replace fuel line if necessary
**
*Service more frequently when used in dusty areas.
**These items should be serviced by a qualified technician.
To Next Page
Loading...
