EasyManua.ls Logo

Predator 59303 - Generator Maintenance Schedule; Regular Cleaning and Checks Schedule; Periodic Engine Maintenance Tasks

Predator 59303
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 15
For technical questions, please call 1-888-866-5797.
ITEM 59303
SAFETYOPERATIONMAINTENANCE SETUP
Maintenance
WARNING
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL STARTING:
Turn the Switch of the Generator to its “OFF” position, close the Fuel Valve, wait for the engine to cool, and
disconnect the spark plug cap before performing any inspection, maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY FROM GENERATOR FAILURE:
Do not use damaged generator. If abnormal noise, vibration, or
excess smoking occurs, have the problem corrected before further use.
Follow all service instructions in this manual. The engine may fail critically if not serviced properly.
Many maintenance procedures, including any not detailed in this manual, will need to be performed
by a qualified technician for safety. If you have any doubts about your ability to safely service the
generator or engine, have a qualified technician service the generator instead.
Cleaning, Maintenance, and Lubrication Schedule
Note: This maintenance schedule is intended solely as a general guide. If performance decreases or if
generator operates unusually, check systems immediately. The maintenance needs of each generator will
differ depending on factors such as duty cycle, temperature, air quality, fuel quality, and other factors.
Note: The following procedures are in addition to the regular checks and maintenance
explained as part of the regular operation of the engine and generator.
Procedure
Before
Each Use
Every 3 mo. or
50 hr. of use
Every 6 mo. or
100 hr. of use
Yearly or
every 300 hr.
of use
Every
2 Years
Page(s)
1. Brush off outside of engine
2. Check engine oil level
3. Check air filter
16-17
Clean/replace air cleaner
*
17
1. Change engine oil
2. Check and clean spark arrestor
3. Check and clean spark plug
16-17
1. Check/adjust idle speed
2. Check/adjust valve clearance
3. Clean fuel tank, strainer
and carburetor
4. Clean carbon build-up from
combustion chamber
**
Replace fuel line if necessary
**
*Service more frequently when used in dusty areas.
**These items should be serviced by a qualified technician.

Related product manuals