Place the attractant:
Remove the seal from the Rapid Action attractant and place it into
the multi attractant compartment.
A. Predator Dynamic is also compatible with the attractant Lurex
3
Turn the hat onto the engine:
Fill up your water trap:
Fill the tray with water (without chloride) and 2 teaspoons of sugar
and one (1) drop of liquid soap (make sure it is without added scent)
to break the water surface tension.
This mix generally produces better catches rates than the dry catch
collector. This is because the airflow from the trap is enriched with
humidity (much like human breath) and also contains scents of
sugar, which to mosquitoes is as a source of energy.
Carefully attach the water filled catch collector:
Slide the catch collector into 3 hooks underneath the engine.
Make sure to tighten firmly.
9
10
11
A
To Next Page
Loading...