EasyManua.ls Logo

Predator Dynamic - Placement guide; Trap Placement

Predator Dynamic
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Predator Dynamic
9
Placement guide
Trap Placement
The location of your trap is a critical variable in maximizing capture rates. Most
mosquito species avoid direct sunlight and wind so we recommend shaded, shelte-
red areas, preferably amongst bushes or shrubs and near any wetland area. Keep
the trap away from areas frequented by humans and animals. Experiment with
different locations to determine the most successful placement for your trap.
Find the sweet spot!
For the best performance from your Mosquito Trap, first determine the source of
the mosquito nuisance (Mosquitoes breed in wet areas like streams, marshland,
wooded areas and gardens). Then use these rules to site the Trap:
Rule 1: Place the Trap between the mosquito source and areas of human activity.
Rule 2: Place the Trap as far away from people ( > 10 meters) and as close to the
mosquito source as possible.
Rule 3: Place the Trap upwind of the mosquito source but only if you can comply
with Rule 1. (Mosquitoes smell pray upwinds)
Rule 4: Always place the Trap in a calm and shaded area. (Mosquitoes avoid heat
and wind)
A. Water/Wetland
B. Wind direction
C. Distance between your house/terrace and the Predator Dynamic should be a
minimum of 10 meters
D. Placement of the Predator Dynamic mosquito trap
E. CO
2
and attractant scent
F. UV-light 360°
G. House/terrace
Patience
Patience and experimentation are the keys to getting the best out of your Mosquito
Trap. It may take as much as 2–4 weeks of use to reduce local populations to the
point that breeding cycles are interrupted. You should not expect to completely get
rid of mosquitoes. Plan ahead and operate the trap for several weeks in advance of
outdoor social occasions. Read the manual and use common sence when placing
the trap. Also try to reduce unnecessary still standing water in your area. Water
puddles uncleaned gutters, old buckets etc are perfect breeding ground for mos-
quitoes. If you do this right the result will come.
DIY mosquito control made easy!
Eliminate standing water in low spots, ditches, gutters and similar areas
Empty receptacles that collect water (eg bird baths and pot plant saucers)
Reduce breeding sites by keeping grass mown
Mosquito netting/screens can be used to provide mosquito-free areas
Light coloured clothing is less attractive to some mosquito species and if tightly
woven, can give some protection against biting
Always carry personal mosquito protection in infested areas. We recommend
Thermacell by Amplecta which is a highly effective, mobile and non toxic repel-
lent system that instantly protects against mosquitoes.

Related product manuals