Press this
1
2
3
Add the required quantity of the
ingredient into the Jar.
Place the FlexiLid onto the Jar, and
press till it seats firmly on the Jar
(Refer figure).
Start grinding. Hold the FlexiLid firmly
while grinding.
NOTE : Ensure that the gasket is fitted properly to
the FlexiLid.
Converts your 1.75 Litre Jar to 1.25 Litre Jar
Adapt your Jar
to suit your
grinding needs
If the Mixie stops in usage due to operation of the
Overload Protector, then:
1. FIRST SWITCH OFF THE MIXIE.
2. Remove some material which is being ground from the Jar,
to decrease the load.
3. Wait for 3 minutes.
4. Lift the Unit and press the RED KNOB projecting out of Bottom Plate.
5. Re-startthe Mixie.
AUTO OVERLOAD PROTECTOR
FLEXILID
9
To Next Page
Loading...