Preethi Regal - Troubleshooting

Symptom
Reason Action
Vessel material or size is
not suitable.
Ensure the Vessel is made of
Steel or Iron or Aluminium with
SS Cladding base and has a
base diameter larger than
12 cm.
Vessel is not placed in the
center of the Glass Top.
Place the Vessel in the centre
circle of the Glass Top.
INDI COOK stops working
after successive short beeps.
Once the set temperature is
reached, the Thermostat will
switch OFF the power.
Vessel temperature is very high. Wait till the Vessel cools down.
If required, reset the
temperature and start cooking.
The heating stops abruptly
when cooking.
The Power Cord is not
properly plugged.
Plug the Power Cord into the
power socket properly.
No beep after power is
switched on.
No display on the
Display Panel.
Troubleshooting
Vessel does not heat up to
the required temperature.
The bottom of the Vessel is not flat.
Use flat bottom Vessel only.
Very high internal temperature
or over Glass Top.
Displays failure code is
E3 or E6.
Switch off the INDI COOK.
Switch on, after the INDI COOK
cools down.
INDI COOK
18