What to do if my Preethi INDI COOK shows error E7 or E8?
If your Preethi Cooktop displays failure codes E7 or E8, it means the voltage is either too high or too low. Please wait until the voltage returns to normal.
What to do if my Preethi INDI COOK Cooktop shows error E3 or E6?
If the Preethi Cooktop displays the error code E3 or E6, it indicates a very high internal temperature or over the ceramic plate. Turn off the cooktop and allow it to cool down before switching it back on.
Why does my Preethi INDI COOK Cooktop stop working and beep?
The Preethi Cooktop might stop working after short beeps if the vessel material or size isn't suitable, or if the vessel is not centered on the ceramic plate. To fix this: * Ensure the vessel is made of steel or iron with a base diameter larger than 12 cm. * Place the vessel in the center circle of the ceramic plate.
Why does my Preethi INDI COOK Cooktop stop heating suddenly?
If the Preethi Cooktop heating stops abruptly while cooking, it could be due to two reasons: * The vessel temperature is very high. Wait for the vessel to cool down. * The set temperature has been reached, and the thermostat has switched off the power. If needed, reset the temperature and continue cooking.
What to do if my Preethi INDI COOK shows error E1, E2, E4, E5, Eb or Ec?
If the Preethi Cooktop displays failure codes E1, E2, E4, E5, Eb, and Ec, this indicates an internal failure. Contact Customer Care.
Highlights the advantages of the INDI COOK induction cooktop.
Details on Antimagnetic Plate, Auto Detection, Soft Touch, Temperature Control, Auto Cooling, and Auto Switch Off features.
Identifies key parts like Power Cord, Air Vent, Ceramic Plate, Control Panel, and Cooking Zone.
Covers turning on, heating, turning off, and setting cooking time.
Information on available cooking modes and how to select them.
Table of default durations for modes and recommended heat levels for cooking.
Notes on changing default temperature and duration for specific models.
To Next Page
General