Symptom
Reason Action
The Power Cord is not
properly plugged.
Plug the Power Cord into the
power socket properly.
Vessel material or size is
not suitable.
Ensure the Vessel is made of
Steel or Iron base and has a
base diameter larger than
12 cm.
Vessel is not placed in the
center of the Ceramic Plate.
Place the Vessel in the centre
circle of the Ceramic Plate.
Vessel temperature is very high. Wait till the Vessel cools down.
Once the set temperature is
reached, the Thermostat will
switch OFF the power.
If required, reset the
temperature and start cooking.
Cooktop stops working
after successive short beeps.
The heating stops abruptly
when cooking.
No beep after power is
switched on.
No display on the
Display Panel.
Troubleshooting
16
To Next Page
Loading...
