Model: IC 103
Model: IC 102
1. Press the “ON/OFF” Button once, the Cooktop starts with a beep and heats up the Vessel in
the “Hot Pot” cooking mode.
2. If there is no Vessel / non suitable Vessel, then the Cooktop will beep for 1 minute and switch OFF.
3. After cooking, Press the “OFF” Button and remove the Vessel.
This will activate the Fan to cool the Cooktop.
? Several “Cooking Modes” are available in the Elegance and Dial models.(Refer Page No.12 for details)
? Select the Mode which suits your requirement.
? The associated preset, timer and temperature settings can be varied using the Buttons in the
Elegance model.
In the Dial model use the Control Knob to control preset, timer and temperature.
?
Cooking “Modes”
Operating Instructions
9
To Next Page
Loading...