Mounting Bracket Arms Elliptical Mounting Bar
Warranty: http://www.mounts.com/warranty
Garantie, Garantía, Garanzia, Garantie, Waarborg
Updates: The most up-to-date installation
guides can be found at mounts.com
www.mounts.com | North America 800.368.9700 | International +1-714-632-7100 | Europe +44 (0) 24 7664 4105
9531-000-001-0X Rev. 0
6
7
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
ECM -3000
Lower and center the mounting bracket arms with the at-
tached flat panel onto the elliptical mounting bar of the
ECM-3000.
Repeat Steps 1 and 2 for mounting the remaining elliptical
tilt mounts.
Do not release the flat panel until the mounting bracket arms
are resting fully on the elliptical mounting bar.
Install the mount according to the instructions provided by
Premier Mounts. Ensure all structural reinforcements have
been made before attaching the flat panel to the ECM-3000.
Do not release the flat panel until the mounting bracket arms
are fully resting on the elliptical mounting bar.
Raise the mounting bracket arms and the attached flat panel
over the elliptical mounting bar of the ECM-3000.
To Next Page
Loading...
