Premier BP-3947 - Proper Way of Measurement; Take a Measurement

Take a Measurement
How to Take Measurement
Measurement starts while inflating.
Press the START/STOP button.
All display symbols appear on the screen.The cuff starts to inflate automatically.
The heartbeat symbol flashes once a pulse is detected.
All symbols display
Start to inflate
Inflating
Heartbest appear
Continue Inflating
Deflating automatically
Start to inflate
P-10P-9
P-8P-7
Battery Installation / Replacement
Use two identical 1.5V alkaline batteries type AAA
LR03.
Replace all of the batteries if the symbol of low
battery appears on the display.
Never leave any low battery in the battery
compartment since they may leak and cause
damage to the unit.
Caution!
MEM
PUL
/min
DIA
SYS
3
Replace the battery cover.
Proper Way of Measurement
M
EM
PUL
/min
DIA
SYS
1cm
Wrap the cuff tightly
around your wrist by
using the Velcro strip.
2
Remove all clothes
from your arm allowing
the cuff to fit directly on
the skin.
1
Proper Way of Measurement
Too low
Too high
OK
4
Place your arm in front of the chest and keep the wrist at
the same level position of your heart.
Sit in a chair with your feet flat on the floor,then turn on
the unit and start to measure.
3