Premier BP-3947 - Use the Memory Function; About Blood Pressure

Use the Memory Function
MEM
PUL
/min
DIA
SYS
When reading the measurement values, press and hold the up
memory button, then press START/STOP button for 3
~4 seconds.
To clean out the memory values
The 60th latest
measurement value
Forward
Backward
The 2nd latest
measurement value
The 1st latest
measurement value
MEM
PUL
/min
DIA
SYS
Press the memory button to view the latest measurement value.
Press the memory button to view the earliest measurement value.
Press the buttons repeatedly to display the next/previous value.
To read the memory values
Use the Memory Function
Turn to next
The 1st latest
measurement value
The Average
measurement value
MEM
PUL
/min
DIA
SYS
Press the memory button. The average value will display on the
screen with the average reading.
To read the average value
The unit stores the blood pressure and pulse rate in the memory
after completing a measurement every time. It can automatically
store 60 sets measurement values. The earliest record is deleted
to save the latest measurement value when more than 60 sets.
The unit also calculates an average reading based on the values of
the latest 3 times measurement taken.
The symbol "M" and the relative times will appear at the same time
after you press the memory buttons.
How to Use the Memory Function
About Blood Pressure
Lower pressure
Relaxation of the
heart muscle
Pressure decreased
to the blood vessel
Blood return heart
Higher pressure
Contraction of
the heart muscle
Pressure increased
to the blood vessel
Extrude blood
Diastolic Blood PressureSystolic Blood Pressure
The blood circulation is responsible for supplying the body with oxygen.
Blood pressure is the pressure exerted on the arteries.
The systolic blood pressure value (higher pressure or top value) represents
the blood pressure produced by contraction of the heart muscle.
The diastolic blood pressure value (lower pressure or lower value)
represents the blood pressure produced by relaxation of the heart muscle.
Blood Circulation
The blood pressure and pulse rate are displayed when the
measurement completed.
Press the START/STOP button to turn off the unit.
The unit will automatically turn off after
two minutes if you have forgotten to
rurn off it.
Please rest for at least 3 minutes before
taking the next measurement.
The cuff is edflated automatically,
and the measurement results are
stored in the memory.
The symblo will be displayed
if arrhythmia is detected.
“KPa”display
“mmHg”display
“IHB”display
Take a Measurement
P-14P-13
P-12P-11