7
Checklist of Tools
• One or two 29 oz. caulking guns
• Hand saw
• Pry bars
• Sledge hammers
• Mineral spirits
• String line
• Lifting eyebolts
• Lifting plates
• Framers square
• Loose 8d and 16d sinker nails
• Dunnage for supporting panels
• Expanding foam
• Fall arrest gear for roofs (if applicable)
• Chalk line
• Levels (4’ or longer)
• Two 5’–6’ 3/4” bar clamps
• Paint scrapers
• Ladders—step & extension
• Come-along with 2” trucking ratchet straps or
• A device similar to Jimmy’s Strapjack Panel
Puller for pulling panels together
• 1/2” drill motor for 1 1/2” diameter
electrical chase holes
• 1 1/2” x 12” auger bit
• 1 or 2 3/8” drill motors
• Chain saw with 14”–16” bar and chain saw
guide for site fabrication
• One or two circular saws
• Power planer
• Foam Scoop and/or Avalon hot knife
• Bits for panel screws
• Nail gun or 1/2” crown staple gun
• Reciprocating saw
To Next Page
Loading...