2
2.1 Safety
Before using the centrifuge, please read this instruction manual carefully. Incorrect or
inappropriate use may result in equipment damage or personal injury!
This centrifuge is designed for clinical medicine, biology, genetic engineering, immunology,
etc. The density of the separated sample cannot exceed 1.2g/cm³ under the maximum speed,
when the density of the sample exceeds 1.2g/cm³, the maximum speed of the rotor must be
reduced accordingly.
When the centrifuge is running (rotor is spinning), Please keep an area of about 12 inches
around the centrifuge clear while operating it and ensure nothing is blocking the vents.
To avoid injury to personnel and or separated samples inside the unit; do not use the
following materials in the centrifuge:
• Flammable and explosive materials
• Strong chemical materials
• Toxic or radioactive materials
To Next Page
Loading...
