Replacing PAC-M200-A Interface Module
Found on Split System PremiSys
®
DOAS Units
Please read and save these instructions for future reference. Read carefully before attempting to operate or
maintain the product described. Protect yourself and others by observing all safety information. Failure to comply
with instructions could result in personal injury and/or property damage!
PAC-M200-A Interface Module for PremiSys
®
Air Products 1
WARNING
Power must be shut off to the PremiSys
®
and the M-NET power source before any work is performed.
All electric work must be performed according to local regulation. Improper electrical work may result in
electric shock or fire.
PAC-M200-A M-NET Cable Specication
Type Of cable
Shielded wire (2-conductors)
CL3P/CMP, UL, RoHS
Conductor Gauge 16AWG
Cable diameter 0.189 - 0.25 inches
Remarks
Max cable length: 200 m (656 ft), Maximum length of transmission lines for centralized control and indoor/outdoor
transmission lines (Maximum length via indoor units): 500 m (1640 ft).
The maximum length of the wiring between power supply unit for transmission lines (on the transmission lines for
centralized control) and each outdoor unit and system controller : 200 m (656 ft)
PAC-M200-A Interface Module for
PremiSys
®
Air Products
© 2015 Mitsubishi Electric US, Inc.
To Next Page
Need help?
General
