PREMIUM STRINGER 8900 Electro - Tension Adjustment and Gripper Release

8
Step 6:
Set the desired tension (such as 20 lbs) by
rotating the tension adjustment knob –
clockwise to decrease the tension and
counterclockwise to increase the tension.
Step 7:
To pull insert the string in the string gripper,
wrap the free end of the string clockwise around
the string gripper and insert the string between
the gripper jaws.
Step 8:
Press the tension switch to motivate the string
gripper to rotate.
Step 9:
After the set tension is attained, the gripper will
stop rotation and the green indicator light will
light up.
Step 10:
To release the string after clamping, press the
tension switch again.
Step 11:
If the string gripper does not release the string
after pressing the tension switch, depress the red
gripper reserving switch once to release the
string.