Do you have a question about the PRESONUS FIREPODOD and is the answer not in the manual?
preamp bandwidth | 10Hz to 50kHz |
---|---|
preamp input impedance | 1.3k Ohms |
preamp THD | <0.005% |
preamp EIN | -125dB |
preamp gain | 54dB |
preamp send output impedance | 51 Ohms |
preamp return input impedance | 10K Ohms |
instrument input impedance | 1M Ohms |
---|---|
line trim | +/-20dB |
line input impedance | 10k Ohms |
TRS output impedance | 51 Ohms |
---|---|
TRS main outputs impedance | 51 Ohms |
TRS cue outputs impedance | 51 Ohms |
headphone output | 150mW/Ch 20Hz-20kHz |
phantom power | 48V +/- 2V |
---|---|
power supply | Ext line Transformer, Internal Switching |
analog to digital converters | 24-bit / up to 96kHz |
ADC dynamic range | 107db |
DAC | 24-bit / up to 96kHz |
DAC dynamic range | 110db |
IEEE1394 speed | 400mbps |
---|
Details the terms and conditions of the limited warranty provided by PreSonus.
Explains the FIREPOD's features and encourages user engagement.
Details minimum system specifications for Macintosh and Windows.
Provides step-by-step instructions for installing FIREPOD drivers on Windows XP.
Explains how to access and use the FIREPOD Control Panel in Windows XP.
Guides users through installing and setting up Cubase LE with the FIREPOD.
Describes how to test the FIREPOD by creating a new project in Cubase LE.
Details the functions of the FIREPOD's front panel controls and connectors.
Explains controls for Main output, Mix, Phones volume, and Sync/Power indicators.
Describes the various input/output ports and power connections on the back panel.
Discusses compatibility and usage of different microphone types with the FIREPOD.
Explains how to connect external processors using send/return jacks.
Illustrates a typical setup for recording a rock band using the FIREPOD.
Provides solutions for common issues like pops, clicks, and no sync.
Lists detailed technical specifications for the FIREPOD's performance and features.