To Next PageTo Next Page
Need help?Do you have a question about the PRESONUS Firestudio Project and is the answer not in the manual?
Microphone Preamp| frequency response (±0.5 dB) | 20 Hz to 50 kHz |
|---|---|
| frequency response (±3.0 dB) | 20 Hz to 150 kHz |
| input impedance (balanced) | 1600Ω |
| maximum input level (unity gain, 1 kHz @ 0.5% THD+N) | +14 dBu |
| phantom power | +48 VDC |
Instrument Input| input impedance | 1 MΩ |
|---|
Line Inputs| frequency response (±0.5 dB) | 20 Hz to 50 kHz |
|---|---|
| frequency response (±3.0 dB) | 20 Hz to 150 kHz |
| input impedance (balanced) | 10 KΩ |
| maximum input level (unity gain, 1 kHz @ 0.5% THD+N) | +10 dBu |
| maximum input level (minimum gain, 1 kHz @ 0.5% THD+N) | +22 dBu |
Line Outputs| output impedance | 51Ω |
|---|
Headphone Output| maximum output | 150 mW/ch @ 60Ω Load |
|---|---|
| frequency response (±1.0 dB) | 10 Hz – 70 kHz |
Digital Audio| adc dynamic range (A-wtd, 48 kHz sample rate) | 114 dB |
|---|---|
| dac dynamic range (A-wtd, 48 kHz sample rate) | 114 dB |
| bit depth | 24 |
| internal sample frequency selections | 44.1, 48, 88.2, 96 kHz |
Power| input voltage range | 90 to 230 VAC |
|---|---|
| power requirements (continuous) | 20W |
Guides users through the physical installation of the FireStudio Project hardware.
Step-by-step instructions for installing the FireStudio Project driver on Windows operating systems.
Step-by-step instructions for installing the FireStudio Project driver on Mac OS X operating systems.
Covers the process of installing and authorizing the Studio One Artist software.
Explains how to ensure the FireStudio Project driver is properly enabled within Studio One.
Guides users on configuring audio input and output routing in Studio One Artist.
Details creating and managing zero-latency cue mixes for monitoring in Studio One.
Describes the FireStudio Project Mixer functionality within the Universal Control Device window.
