PRESONUS Firestudio Project Connection Instruction

Digitizing records with a Monitor Station and an FireStudio Project
Grounding wire
RCA - RCA
TRS - TRS
TRS - TRS
XLR (M) - TRS
XLR (M) - TRS
FireStudio Project front
FireStudio Project back
What you’ll need:
4 XLR (M) - TRS cables
4 TRS - TRS cables
2 RCA - RCA cables
1 grounding wire
[included with most turntables]
PreSonus Audio Electronics | 7257 Florida Blvd, Baton Rouge, LA USA | Tel: 225-216-7887 | Fax: 225-926-8347 | www.presonus.com | sales@presonus.com

PRESONUS Firestudio Project Specifications

Microphone Preamp

frequency response (±0.5 dB)	20 Hz to 50 kHz
frequency response (±3.0 dB)	20 Hz to 150 kHz
input impedance (balanced)	1600Ω
maximum input level (unity gain, 1 kHz @ 0.5% THD+N)	+14 dBu
phantom power	+48 VDC

Instrument Input

input impedance	1 MΩ

Line Inputs

frequency response (±0.5 dB)	20 Hz to 50 kHz
frequency response (±3.0 dB)	20 Hz to 150 kHz
input impedance (balanced)	10 KΩ
maximum input level (unity gain, 1 kHz @ 0.5% THD+N)	+10 dBu
maximum input level (minimum gain, 1 kHz @ 0.5% THD+N)	+22 dBu

Line Outputs

output impedance	51Ω

Headphone Output

maximum output	150 mW/ch @ 60Ω Load
frequency response (±1.0 dB)	10 Hz – 70 kHz

Digital Audio

adc dynamic range (A-wtd, 48 kHz sample rate)	114 dB
dac dynamic range (A-wtd, 48 kHz sample rate)	114 dB
bit depth	24
internal sample frequency selections	44.1, 48, 88.2, 96 kHz

Power

input voltage range	90 to 230 VAC
power requirements (continuous)	20W