Need help?Do you have a question about the PRESONUS FireStudio and is the answer not in the manual?
Microphone Preamp| frequency response (+0, -0.5dB) | 20Hz to 50kHz |
|---|---|
| frequency response (+0/-3.0dB) | 20Hz to 150kHz |
| input impedance | 1600 Ohm |
| THD + N | < 0.003% |
| EIN | -126dBu |
| S/N ratio | >101dB |
| common mode rejection ratio | >55dB |
| gain control range | -6dB to 55dB |
| maximum input level | +17dBu |
| phantom power | +48VDC |
Instrument Input| input impedance | 1 Mega Ohm |
|---|
Line Inputs| frequency response (+0, -5dB) | 20Hz to 50kHz |
|---|---|
| frequency response (+0/-3.0dB) | 20Hz to 150kHz |
| input impedance | 10 KOhm |
| THD + N | < 0.003% |
| S/N ratio | >101dB |
| gain control range | -9dB to +12dB |
| maximum input level | +23dBu |
Digital Audio| ADC dynamic range | 107dB |
|---|---|
| DAC dynamic range | 110dB |
| bit depth | 24 |
| reference level for 0dBFS | +18dBu |
| internal sample frequency selections | 44.1, 48, 88.2, 96 kHz |
| BNC word clock output level | 4.5V |
| BNC word clock input level range | 3.0 to 5.5V |
Clock| jitter | <20ps RMS (20 Hz – 20 kHz) |
|---|---|
| jitter attenuation | >60 dB (1 ns in => 1 ps out) |
Power| input voltage range | 18 to 30 VDC |
|---|---|
| power requirements (continuous) | 24W |
| external switching power supply | 90-230VAC / 35W |
Provides a general introduction to the PreSonus FireStudio and its capabilities, encouraging manual reading.
Lists the key features and specifications of the FireStudio audio interface and bundled software.
Details the contents of the FireStudio package, including the interface, cables, power supply, and software discs.
Outlines the minimum hardware and operating system requirements for using the FireStudio with Mac and Windows.
Guides users through the initial installation process for the FireStudio on Windows and Mac operating systems.
Provides visual examples of connecting the FireStudio for mobile recording and full band setups.
Discusses different microphone types (condenser, dynamic, ribbon) and their compatibility with the FireStudio.
Introduces the basics of dynamics processing, including common questions and the need for compression.
Explains ADAT optical, S/MUX, BNC Sync, and Word Clock for connecting and synchronizing digital audio devices.
Introduces the FireStudio Control Console application and its routing and mixing capabilities.
Covers basic controls for sample rate, buffer size, and clock source selection within the FireStudio.
Details the virtual patch bay for custom routing of inputs and playback streams to physical outputs.
Covers the creation, renaming, and saving of 9 stereo monitor mixes and channel strip controls.
Details the components and functions of the FireStudio's front panel, including microphone preamplifiers and instrument inputs.
Describes the various ports and connections found on the back panel of the FireStudio, including power, FireWire, MIDI, BNC, and digital I/O.
Provides solutions for common issues like pops, clicks, sync problems, and no input signal on channels 1 or 2.
Presents detailed technical specifications for microphone preamps, line inputs, digital audio, clock, power, and more.
To Next Page
