What to do if there is no output on a channel on my PRESONUS StudioLive AR?
If there's no output on a channel of your PRESONUS Music Mixer, start by checking the signal-present LED to confirm signal presence. If there's no signal, inspect the cable and input source. Ensure the trim control is appropriately set and the channel isn't muted. If your device needs phantom power, make sure it's enabled for that channel.
What to do if microphone preamp 1 or 2 doesn't pass audio on PRESONUS Music Mixer?
If microphone preamp 1 or 2 isn't passing audio on your PRESONUS Music Mixer, first, check that the Instrument input button is not engaged, as this disables the microphone preamp. Next, make sure your microphone cable is working correctly and that the trim control is set to an appropriate level.
What to do if there is no output on the solo bus while monitoring with my PRESONUS Music Mixer?
If there is no output on the solo bus while monitoring with your PRESONUS Music Mixer, verify that both the Cue volume and the headphone, or monitor, volume are at a reasonable level for comfortable listening. Also, ensure that the PFL button is engaged on the channels you want to solo.
Why doesn't the main fader control the mix level on my PRESONUS StudioLive AR?
If the main fader isn't controlling the mix level on your PRESONUS Music Mixer, the most likely cause is that your monitors are connected to the Control Room outputs instead of the Main outputs. Ensure your monitors are connected to the Main outputs.
How to fix if I can't hear the main mix in headphones with my PRESONUS StudioLive AR?
If you can't hear the main mix in your headphones using your PRESONUS Music Mixer, first, check that the headphone output control is at a sufficient level. Also, ensure that no PFL or AFL buttons are engaged.
General| Brand | PRESONUS |
|---|---|
| Model | StudioLive AR-Series |
| Category | Music Mixer |
| Language | English |
To Next Page
