Need help?Do you have a question about the PRESONUS TubePre V2 and is the answer not in the manual?
General| Tube Type | 12AX7 |
|---|---|
| Output Impedance | 50 Ω |
| Polarity Reverse | Yes |
| Maximum Output Level | +20 dBu |
| Type | Microphone Preamplifier |
| Input Impedance | 1 MΩ |
| Phantom Power | 48V |
| Inputs | 1 x XLR |
| Outputs | 1 x XLR |
| Low Cut Filter | 80 Hz |
| Dimensions | 1.75" x 5.5" x 6" |
| Weight | 1.5 lbs (0.68 kg) |
Introduces the PreSonus TubePre V2, its purpose, and contact information.
Lists the key features of the TubePre V2, including its tube preamp and controls.
Details the items included in the PreSonus TubePre V2 package.
Provides step-by-step instructions to connect and begin using the TubePre V2.
Explains how to use the TubePre V2 effectively with an audio interface for recording.
Illustrates the connection setup for using the TubePre V2 as a direct input box.
Shows a diagram for connecting the TubePre V2 to an audio interface.
Describes the controls and connectors on the front panel of the TubePre V2.
Details the connectors and ports located on the back panel of the TubePre V2.
Offers guidance on maintaining and replacing the vacuum tube in the TubePre V2.
Lists the technical specifications for the PreSonus TubePre V2 device.
Provides steps and advice for resolving common issues with the TubePre V2.
Outlines the terms and conditions of the limited warranty for the PreSonus TubePre V2.
To Next Page
