Need help?Do you have a question about the PRESONUS MP20 and is the answer not in the manual?
General| Number of Channels | 2 |
|---|---|
| Connectors | XLR input, XLR output |
| Type | Microphone Preamp |
| Phantom Power | +48V |
| Frequency Response | 10 Hz to 50 kHz |
| THD+N | 0.01% |
| EIN | -129 dBu |
Details the terms, conditions, and limitations of the limited warranty provided by PreSonus.
Welcome message and initial guidance for users of the MP20 pre-amplifier.
Details core features like FET buffers, phantom power, polarity reverse, and pad.
Continues feature description with Rumble Filter, IDSS Control, and Mix Bus.
Details the high-gain headphone output for monitoring.
Describes the front panel layout and its main sections and controls.
Details controls within the preamplifier sections like L/R Assign, IDSS, and Phantom Power.
Explains Phase Reverse, -20 dB Pad, 80 Hz Filter, and Gain controls.
Describes the master section controls, including Level, Phones, and Power.
Details back panel connectors, including Mix Output, Send/Return, and XLR wiring.
Information on the power jack, input voltage, and requirements.
Guidance on connecting and using dynamic microphones with the MP20.
Instructions for utilizing the return jacks as line inputs for external audio devices.
Comprehensive list of technical data including dynamic range, noise floor, and frequency response.
To Next Page
