Need help?Do you have a question about the Pressure Systems 98RK-1 and is the answer not in the manual?
General| Brand | Pressure Systems |
|---|---|
| Model | 98RK-1 |
| Category | Scanner |
| Language | English |
Explains the manual's purpose, covering connections, setup, software, and programming.
Details available pressure ranges and pneumatic manifold configurations for the scanners.
Guides users on verifying shipment contents and handling potential shipping damage.
Outlines essential safety precautions for operating and working with the equipment.
Covers physical and network connections for scanners and external modules to the rack.
Provides instructions on how to read pressure and temperature data from the channels.
Introduces command structure, communication protocols, command types, and responses.
Explains the calibration process, polynomial calculations, and manifold valve positions.
Details the process for performing a zero calibration to compensate for transducer offset drift.
Explains how to perform a span calibration to adjust gain coefficients for accuracy.
Describes the advanced function for adjusting offset and gain using multiple calibration points.
Explains how to store calculated calibration coefficients in non-volatile memory.
Highlights precautions when issuing commands that shift the calibration valve under pressure.
Provides guidance on performing repair and maintenance of scanners and the interface rack.
Describes the process for updating the scanner module firmware via TCP/IP.
Offers methods for diagnosing power-up issues, LED status, and TCP/IP communications.
Addresses common errors and problems related to Re-zero and Span calibration procedures.
Introduces the NetScanner System Unified Startup Software (NUSS) for operating modules.
To Next Page
