EasyManua.ls Logo

Prestige medical Advance - User Manual

Prestige medical Advance
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
304278D
Advance User Manual
Vacuum (B) &
Non-Vacuum (N) Autoclaves
Question and Answer IconNeed help?

Do you have a question about the Prestige medical Advance and is the answer not in the manual?

Summary

Section 1: Introduction

Types of load and loading

Describes different load types and how to arrange them for sterilization.

Warning: Suitability of other loads

Highlights the need for a responsible person to qualify loads and check specifications for autoclaving.

Section 2: Operating symbols, displays and controls

Symbols overview

Explains the meaning of various symbols used on the autoclave controls and displays.

General controls and operations

Details the function of each button and operational control on the autoclave unit.

Vacuum cycle controls

Details the selection and operation of different vacuum cycles available on the autoclave.

Non-vacuum cycle controls

Details the selection and operation of different non-vacuum cycles available on the autoclave.

Display options and status indicators

Explains how to view cycle information like time, date, temperature, and pressure.

Section 3: Operation

Installation and connection procedures

Provides step-by-step instructions for installing and connecting the autoclave unit.

Water system and filling

Details the single-use water system and critical instructions for filling the tank with the correct water type.

Setting date and time

Guides the user through the process of setting the autoclave's internal date and time.

Ready mode and operation

Explains how to put the autoclave into 'Ready Mode' and its implications.

Loading instruments and cycles

Provides guidelines on how to properly load instruments and select appropriate sterilization cycles.

Door closing and cycle start

Describes the procedure for closing the autoclave door and initiating a sterilization cycle.

Cycle options and additional drying

Details how to select various cycle options and add extra drying time to cycles.

Starting and monitoring cycles

Explains how to start a cycle and interpret the visual display of cycle stages.

Special tests: Steam Penetration and Leak

Details procedures for performing Steam Penetration and Vacuum System Leak tests.

Auto-cycle start programming

Guides on how to program the autoclave to start cycles automatically at a set time.

Section 4: Essential information

Essential operational practices

Lists crucial 'do ensure' points for correct autoclave operation and maintenance.

Prohibited actions and warnings

Outlines 'do not' actions to avoid damage, safety hazards, or incorrect operation.

WEEE Disposal Statement

Provides information on the disposal of the electrical equipment according to WEEE directive.

Section 5: Routine care and maintenance

Daily gasket cleaning

Details the essential daily procedure for cleaning the autoclave gasket to ensure proper sealing.

Monthly tank cleaning

Provides instructions for monthly cleaning of the fresh water tank to maintain water quality.

Gasket replacement procedure

Explains how to replace the autoclave door gasket if it develops a persistent leak.

Section 6: Trouble shooting

Section 7: Recovery sequence

Recovery sequence procedures

Outlines the steps for different recovery sequences to safely retrieve instruments after a fault.

Emergency door opening

Provides critical instructions for opening the door in emergencies or power loss situations.

Section 8: Additional information

Operator and responsible person roles

Defines the roles and responsibilities of the operator and the designated responsible person.

Manual handling and positioning

Gives guidance on safely unpacking, moving, and positioning the autoclave unit.

Spares and consumables

Lists approved spare parts and consumables for the autoclave, including part numbers.

Cleaning materials and disposal

Details recommended cleaning agents and the WEEE disposal procedures for the unit.

Section 9: Warranty (UK mainland only)

Section 10: Printer instruction (Optional)

Printer setup and operation

Details connecting the printer, loading paper, and interpreting status indicators.

Data logger instructions

Refers users to separate instructions for setting up and operating the data logger.

Section 11: Specification

Chamber specifications and dimensions

Lists the technical specifications for the 16 litre and 22 litre chamber models.

Safety features and shutdown

Describes the autoclave's safety mechanisms, including temperature cut-out and automatic shutdown.

Environmental and operational limits

Outlines the recommended environmental conditions and operational limits for the autoclave.

Water usage and power consumption

Details the water consumption per cycle and the power usage of the autoclave.

Section 12: Cycle profiles

134°C;31;2 min vacuum cycle profile

Presents the pressure and time profile for the 134°C/31/2min vacuum sterilization cycle.

134°C;18 min vacuum cycle profile

Details the pressure and time profile for the 134°C/18min vacuum sterilization cycle.

134°C;3.5 min steam penetration test profile

Describes the profile for the steam penetration test cycle, noting differences from vacuum cycles.

134°C;31;2 min bagged solid instruments profile

Shows the pressure and time profile for the 134°C/31/2min cycle for bagged solid instruments.

Non-vacuum cycles profile (134°C & 121°C)

Illustrates the pressure and time profiles for non-vacuum cycles at 134°C and 121°C.

Section 13: Water quality

Clean steam water specifications

Lists the required water quality parameters for producing clean steam in the autoclave.

Routine water monitoring

Details the parameters and methods for routine monitoring of water quality.

Section 14: Loading the autoclave

Maximum permissible load limits

Specifies the maximum weight limits for different load types in vacuum and non-vacuum cycles.

Autoclave loading best practices

Provides guidance on arranging instruments and pouches for optimal sterilization and drying.

Section 15: Daily record sheet

Daily record sheet key and usage

Explains the key for load types and how to use the daily record sheet for tracking cycles.

Prestige medical Advance Specifications

General IconGeneral
BrandPrestige medical
ModelAdvance
CategoryLaboratory Equipment
LanguageEnglish

Related product manuals