EasyManua.ls Logo

Prestige medical Anima - User Manual

Prestige medical Anima
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User Manual
Vacuum &
Non-Vacuum Autoclave
www.dlc.com.au
Question and Answer IconNeed help?

Do you have a question about the Prestige medical Anima and is the answer not in the manual?

Summary

Section 1: Introduction

Types of Load and Loading

Details the autoclave's qualification for sterilizing loads as defined by EN13060.

Section 2: Operating Symbols, Displays and Controls

Symbols Overview

Explanation of symbols used on the autoclave's display and controls.

General Controls and Operations

Details on the autoclave's buttons, displays, and operational functions.

Section 3: Operation

Installation and Connection

Procedures for installing the unit and connecting it to the power supply.

Water System and Tank Maintenance

Details on the single-use water system and waste water container.

Setting Date and Time

Instructions for setting the autoclave's date and time.

Loading and Cycle Options

Guidance on loading instruments and selecting available sterilization cycles.

Starting and Opening the Autoclave

Procedures for starting cycles, opening the door, and performing tests.

Auto-Cycle Start Feature

Instructions on programming the unit to start cycles automatically.

Section 4: Essential Information

Key Operational Requirements

Essential points to follow for correct autoclave operation and maintenance.

Prohibited Actions

List of actions to avoid, such as using tap water or inappropriate materials.

Section 5: Routine Care and Maintenance

Daily Maintenance

Daily cleaning of the gasket and vessel using warm soapy water.

Interval Maintenance

Tasks performed at specific intervals, including air filter and water filter replacement.

Component Specific Maintenance

Cleaning exterior surfaces, replacing gasket, and maintaining water tanks.

Section 6: Trouble Shooting

Section 7: Recovery Sequence

Recovery Sequence i

Procedure to stabilize the unit and recover instruments after a fault.

Recovery Sequence ii

Procedure indicating service is required when stabilization fails.

Recovery Sequence iii

Procedure to stabilize and return the unit to 'Ready Mode'.

Emergency Door Opening

Procedures for safely opening the door during emergencies or power loss.

Section 8: Additional Information

Personnel Roles and Definitions

Definitions of roles like Operator, Responsible Person, and Qualified Person.

Manual Handling Procedures

Guidelines for safely unpacking and positioning the autoclave.

Product Decontamination

Procedure for decontaminating the unit before repair or return.

Product Information

Details on product approvals, spare parts, and consumables.

Section 9: Warranty

Section 10: Printer Instruction (Optional)

Printer Power and Setup

Steps to connect and power on the optional printer.

Paper Roll Replacement

Instructions for replacing the printer paper roll and ensuring proper feeding.

Printer Status and Troubleshooting

Explanation of the printer's status LED indicator and fault identification.

Data Logger Operation

Reference to instructions for setting up and operating the data logger.

Section 11: Technical Specification

Chamber Specifications

Materials used for chamber components and detailed capacity specifications.

Safety and Operational Parameters

Details on safety shutdown, pressure release valve, and temperature cut-out.

Environmental and Storage Conditions

Recommended environmental conditions, storage, and packaging information.

Electrical and Performance Specs

Information on power usage, sound level, voltage, and heaters.

Section 12: Water Quality

Section 13: Loading the Autoclave

Section 14: Daily Record Sheet

Prestige medical Anima Specifications

General IconGeneral
BrandPrestige medical
ModelAnima
CategoryLaboratory Equipment
LanguageEnglish

Related product manuals