62/118
SEWAGE DRAINAGE - WC
TOILET OPERATION QUIET FLUSH 12V
USE OF THE MARINE HEADS
Before you use the heads, check that the water intake valve and draining valve are open.
To empty the bowl:
- Set the control lever of the pump slantwise (FLUSH).
- Operate the pump.
To dry the bowl:
- Set the lever back vertical (DRY).
- Operate the pump.
To avoid blocking the toilets only use absorbent paper in reasonable quantities.
Schedule a regular rinsing through of the heads with fresh water.
Close the valves after each use (in particular when the boat is unattended).
1. Seawater pump 12V
2. Filter
Control
WARNING
Refer to the manufacturer's instructions for use and maintenance.
To Next Page
Loading...
