7
7. Now, press the coee/steam selector to " " position. e switch will illuminate indicating the
appliance is preheating the water.
8. Once the preheating is over, the appliance will automatically switch o. e indicator light will
stop glowing.
9. Press the pump control switch to '
' position. Water will start owing out of the funnel.
10. Once the water stops coming out of the funnel, you can pour out the water from the tank and
clean them.
Now you can start using the coee maker.
Note: ere may be some noise while begining to use the appliance for the rst time. is is
normal. is is due to the pump releasing the air in the appliance. e noise will disappear in
about 30 seconds.
To Next Page
Loading...