Prestige Espresso Coffee Maker - Pre-heating the Coffee Maker; Pre-heating Procedure

8
PRE-HEATING THE COFFEE MAKER
It is advisable to pre-heat the coee maker before brewing coee including the funnel, steel lter and
the cup so that you get coee with good aroma and avour.
1. Remove the water tank lid and ll with water. Do not exceed the "MAX" level and less than
'MIN' level indicated on the water tank.
2. Set the steel lter into the metal lter. Make sure that the tube on the funnel aligns with the
groove in the appliance. Insert the funnel into its position from the "INSERT" position and you
can x the funnel into coee maker rmly when you turn it anti-clockwise until it is locked in
the “LOCK” position.
3. Place a container or cup on the detachable drip tray.
5. Press the "ON/OFF" switch to "ON" position. e "ON" indicator will glow
6. Pres the coee/steam switch to "
" position.
7. Press the pump control switch to '
' position
8. Once the water starts owing out of the funnel, switch o the pump control by pressing pump
control switch to "
" position. Pre-heating is complete