Presto Fountain - Questions and Answers

6
Fig. C
Pivot
point
Slot
Pivot
point
Slot
Serving door
Left
side
Right
side
Reattach the serving door to the
cabinet; with the PRESTO
®
logo
toward you, squeeze the left and right
sides of the door together slightly and
insert the pivot points on the bottom
of the door in the slots on the bottom
of the door opening (Fig. C). Rotate
the door to the closed position.
7. Wipe the popping chamber, includ-
ing the bottom seal, with a soft, dry
cloth. Never immerse the popping
chamber in water or other liquid.
Do not wash in a dishwasher. Store
the popping chamber on the heating
platform.
Questions and Answers
How can I get salt and other seasoning to stick to my popcorn so it has more
avor?
Before adding salt or seasoning, lightly spray popcorn in baskets with no stick
cooking spray. Salt and seasoning will adhere better and give the popcorn more
avor.
My popper shuts off immediately after I turn it on, and I notice a scorched corn
odor. Why?
You are using more than a level ½ cup of popping corn. Overloading the popping
chamber may cause the unit to overheat and shut off. It may also cause smoking
and scorched corn. Should the unit shut off, press the “O” on the on/off switch and
remove the popping chamber from the heating platform. Empty any popped or
unpopped corn from the chamber. Allow the popper to cool for 15 minutes before
using again; be sure to use the measuring cup provided.
My popper turns on, but my popcorn doesn’t pop and I can smell scorched corn.
What is happening?
You may not have the popping chamber correctly positioned on the heating platform.
For proper positioning, be sure to t the tab on the base in the pocket on the back
of the popper cabinet (Fig. B). While grasping the handle, rmly push the popping
chamber down until you hear it lock in place. Pull the chamber towards you to ensure
it is securely in place.