IMPORTANT:
Read before Using
EN
21
The safety instructions and the user manual should be
read through carefully before using the product.
SAFETY INSTRUCTION:
1. Keep the instrument dry.
2. Keep the probe clean.
3. Keep the instrument and battery out of reach of infants and
children.
4. Some factors (such as material type and temperature can affect
moisture measurement result, and may make it necessary to
correct the displayed value. Don’t use the instrument in the case
of inspections or for reference purposes.
5. When the symbol” “appears,the batteries are low and
should be replaced.
Ensure that battery polarity connections are correct when
replacing batteries.
If you are not using the instrument for a long time, remove the
battery.
a. Measured value display
b. Low battery indicator
c. Measuring mode of Building materials
d. Measuring mode of Wood
e. Unit of measurement ˚C / ˚F
f. Unit of measurement %
2. SWITCHING ON/OFF
The device switches off automatically if
no operation for 15 seconds
3. MEASURING MODE CHANGE
The device switches off automatically if
no operation for 15 seconds
FUNCTION
This instrument can be used to detect and evaluate the moisture
level in sawn timber (also paper, cardboard) and hardened
materials(mortar, concrete and plaster). It displays the moisture
level directly. In addition, the device can be set up to measure the
ambient temperature.
PRODUCT OVERVIEW
DISPLAY
1. INSERT BATTERIES
Open the battery compartment and
insert the LR44 batteries according
to the symbols. Pay attention to the
polarity while inserting the batteries.
OPERATION INSTRUCTION
PARTS DESCRIPTION
A
B
C
D
E
Probe Cover
Probe
LCD
On switch; switch between
measuring mode
Battery compartment (rear)
MOISTURE METER
A
B
C
D
E
a
b
d
e
C
f
Change batteries when
battery symbol is flashing.
ON
Device on
Symbols flash
1 sec
1x
3 sec
1x
1 sec
1x
1 sec
1x
1 sec
1x
To Next Page
Loading...
Need help?
General
