3 4
Technical data
Measuring principle
Measurement range for wood
Building materials measurement range
Temperature measuring range
Accuracy for wood
Accuracy for building materials
Storage temperature
Operating temperature
Storage/Operation humidity
Power supply
Dimensions (W x H x D)
Weight (incl. batteries)
Resistive material moisture measurement
by way of integrated electrodes
6~42%
0.2~2.0%
0~40°C
reading<30%: ±2%
reading≥30%: ±4%
reading<1.4%: 1%
reading≥1.4%: 2%
-10 °C~50 °C
0 ~ 40 °C
<85%
4x LR44 button cell, 1.5 V
22 x 42 x 83 mm
44 g
DISPOSAL
4. TO MEASURE THE MOISTURE
Make sure there are no power lines (wires, water pipes, etc.) and
metal surfaces at the location to be tested. Insert the electrode into
the material as much as possible, but never use excessive or
sudden impact forces as this may damage the device. Read the
value of moisture on the LCD. Always pull the device out of the
material with a left/right twisting action when testing is finished.
5. TO MEASURE THE TEMPERATURE
Switch the device to ºC or ºF mode, and read the ambient
temperature value on the LCD.
After the instrument is turned on,pressing the button
turns on the backlight. About 3 seconds later, the backlight
turns off automatically.
The device starts with the last selected measurement mode.
To select a mode, press and hold the Settings button for
3 seconds then wait until symbol stops flashing.
CAUTION
CAUTION
The batteries must not be disposed with household waste. Care for
the environment and take them to the collection points provided in
accordance with national or local regulations.
Dispose of the product appropriately in accordance
with the national regulations in force in your country.
Adhere to the national and country specific regulations.
Product specific treatment and waste management can be
downloaded from our homepage.
WARRANTY
The Instrument PMX-42A has a two-year warranty.
For further information on this, contact your dealer.
This warranty is void if product is used for commercial purposes.
This warranty is not transferable and does not cover products
damaged by misuse, neglect, accident, alterations or use and
maintenance other than that specified in the owner's manual. This
warranty does not apply to any expendable parts that can wear
from normal use. This warranty excludes any accessories.
PROHIBITED USE
• Using the product without instruction
• Using outside the stated limits
• Deactivation of safety systems and removal of explanatory and
hazard labels
• Opening of the equipment by using tools (screwdrivers, etc.)
• Carrying out modification or conversion of the product
• Use of accessories from other manufacturers without express
approval
LIMITS OF USE
i
Never attempt to repair the product yourself. In case of damage,
contact a local dealer.
Refer to section "Technical data".The device is designed for
use in areas ently habitable by humans. Do not use the product
in explosion hazardous areas or in aggressive environments.
AREAS OF RESPONSIBILITY
RESPONSIBILITIES OF THE PERSON IN CHARGE OF
THE INSTRUMENT:
• To understand the safety instructions on the product and the
instructions in the User Manual.
• To be familiar with local safety regulations relating to accident
prevention.
• Always prevent access to the product by unauthorised personnel.
To Next Page
Loading...
Need help?
General
