Prexiso PLT40LI - User Manual

Questions and Answers

N
Nicole GonzalezJul 25, 2025
Why my Prexiso Measuring Instruments fails to switch on?
- L
  leeryanJul 25, 2025
  If your Prexiso Measuring Instruments fails to switch on, several factors could be at play. First, the device might have hardware protection triggered by a shock, in which case, try restarting it. Alternatively, the battery could be low, requiring you to recharge the device. Finally, ensure you are pressing the On/Measure/Units button firmly, as an insufficient press can prevent the device from powering on.
M
Martha WrightAug 2, 2025
What to do if Prexiso Measuring Instruments displays IC000 IC255 error?
- S
  stevenfarmerAug 2, 2025
  When the Prexiso Measuring Instruments displays error codes IC000 or IC255, it indicates an issue with the measurement process. This could be due to several reasons: * Moving the beam too fast, in which case you should move the measuring tool more slowly. * The object being out of the rated range, so ensure you measure within the specified range. * A weak signal or long measuring time, suggesting a change in the target surface (e.g., using white paper) might help. * A signal that is too strong, meaning the target is too reflective; again, try changing the target surface. * Strong ambient light interfering with the measurement; try shadowing the target area.
L
lorisharpAug 10, 2025
What to do if Prexiso PLT40LI Measuring Instruments displays IC401 error?
- H
  Hannah JonesAug 10, 2025
  If your Prexiso Measuring Instruments displays the error code IC401, it indicates a hardware problem. Try restarting the device. If the issue persists after restarting, no other solution is available.
R
ricardo71Aug 17, 2025
How to fix IC301 error on Prexiso PLT40LI?
- D
  Dana Peterson MDAug 17, 2025
  If your Prexiso Measuring Instruments shows the error code IC301, it means the running program is not functioning correctly. To resolve this, restart the device following the instructions in the manual.