EN
Safety Instructions
Symbols used
WARNING
CAUTION
Hazards in use
WARNING
CAUTION
WARNING
Limits of use
i
Prexiso PLT40LI
7
Permitted use
•
Measuring distances
Prohibited use
•
Using the product without instruction
•
Using outside the stated limits
•
Deactivation of safety systems and
removal of explanatory and hazard
labels
•
Opening of the equipment by using
tools (screwdrivers, etc.)
•
Carrying out modification or conversion
of the product
•
Use of accessories from other
manufac-turers without express
approval
•
Deliberate dazzling of third parties;
also in the dark
•
Inadequate safeguards at the
surveying site (e.g. when measuring on
roads, construction sites, etc.)
•
Deliberate or irresponsible behaviour
on scaffolding, when using ladders,
when measuring near machines which
are running or near parts of machines
or installations which are unprotected
•
Aiming directly in the sun
The person responsible for the instrument
must ensure that all users understand
these directions and adhere to them.
Watch out for erroneous measurements if
the instrument is defective or if it has
been dropped or has been misused or
modified. Carry out periodic test
measurements.Particularly after the
instrument has been subject to abnormal
use, and before, during and after
important measurements.
Never attempt to repair the product
your-self. In case of damage, contact a
local dealer.
Changes or modifications not expressly
approved could void the user’s authority
to operate the equipment.
Refer to section "Technical data".The
device is designed for use in areas
ently habitable by humans. Do not use
the product in explosion hazardous areas
or in aggressive environments.
The symbols used have the following
meanings:
Indicates a potentially hazardous
situation or an unintended use which, if
not avoided, will result in death or serious
injury.
Indicates a potentially hazardous
situation or an unintended use which, if
not avoided, may result in minor injury
and/or appre-ciable material, financial
and environ-mental damage.
Important paragraphs which must be
adhered to in practice as they enable
the product to be used in a technically
correct and efficient manner.
To Next Page
Loading...
Need help?
General
