EasyManua.ls Logo

PRGR HS-130A - Measuring (Pitching Mode); Pitching Mode Operation; Pitching Mode Setup

PRGR HS-130A
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
The speed (initial speed) of thrown balls can be measured in this mode.
(1) Turning on the power
* See “Turning On the Power” on pg. 6
(2) Selecting modes
Press and hold the MODE button for approximately 2 seconds to change modes and select
Pitching mode .
* Continuously pressing the MODE button will scroll through the four modes in order.
(3) Setting up the device and taking measurements
Use a commercially sold tripod or similar equipment to set up the device as shown in the
illustration below.
* Always check the surrounding area for safety.
Measuring (Pitching Mode)
3.3 ft.
Height from waist
to shoulder
3.3 ft. or less