11
In this mode, the speed of thrown balls at the target (final speed), as well as the speeds of balls
for various types of sports can be measured, such as soccer ball shooting speeds.
* This function measures the speed of objects (balls) that pass through its periphery.
* Measurement may not be possible depending on the materials of objects or their distance.
(1) Turning on the power
* See “Turning On the Power” on pg. 6
(2) Selecting modes
・ Press and hold the MODE button for approximately 2 seconds to change modes and select
Multi mode .
* Continuously pressing the MODE button will scroll through the four modes in order.
(3) Setting up the device and taking measurements
Use a commercially sold tripod or similar equipment to set up the device as shown in the
illustration below.
* Always check the surrounding area for safety.
[Measuring Final Speed at the Target]
● Set up the device 3.5 ft behind the net and throw the ball at the net.
* Always check the surrounding area for safety and make sure balls that ricochet off the net
do not pose a safety hazard.
* Correct measurement may not be possible depending on the ball material.
3.5 ft
Estimated measurement range
3.5 ft
3.5 ft
Device
Measuring (Multi Mode)
To Next Page
Loading...