Need help?Do you have a question about the Pride Mobility JAZZY 1103 ULTRA and is the answer not in the manual?
General| Weight Capacity | 300 lbs |
|---|---|
| Overall Width | 24.25 in |
| Overall Length | 35.75 in |
| Turning Radius | 20.5 in |
| Maximum Speed | 4 mph |
| Range Per Charge | Up to 9 miles |
| Drive Type | Rear-Wheel Drive |
| Battery Type | Two 12 V, U-1 |
| Ground Clearance | 2 in |
| Drive Wheels | 10 inches |
| Battery Size | U-1 |
| Battery Weight | 24.5 lbs each |
| Top Speed | 4 mph |
| Front Casters | 6 inches |
| Rear Casters | 6 inches |
| Seat Width | 18 inches |
| Seat Depth | 16 inches |
| Charger | 3 amp, off-board |
| Drive System | Rear-wheel drive |
Details the user's commitment regarding product modification and safety features.
How to provide feedback and contact customer care for updates.
Information on enrolling in the Pride Owners Club and its benefits.
Explains symbols used to identify warnings and important information on the chair and manual.
Warns against unauthorized modifications that could cause injury or damage.
Lists essential pre-operation checks to ensure the power chair operates safely.
Specifies the maximum weight capacity and prohibits carrying passengers.
Provides guidance on safe operation on inclines and ramps.
Advises on safe cornering techniques to prevent tipping.
Crucial safety warnings regarding the use of freewheel mode.
Identifies the main seat and power base assemblies and their parts.
Lists technical specifications such as speed, range, and weight capacity.
Details the location and function of electrical parts like the ammeter and circuit breaker.
Explains how to engage and disengage the drive motors for manual maneuvering.
Covers initial setup, disassembly, and reassembly of parts.
Step-by-step guide for installing the seat assembly onto the power base.
How to adjust seat height and angle, including seat dump.
Adjusting seat position and seatback angle.
Modifying armrest width and angle for user comfort.
Adjusting foot platform height, depth, and angle.
Positioning the controller for left or right-hand use.
Rotating swing-away and adjusting elevating leg rests.
Adjusting heavy-duty leg rests and anti-tip wheels.
How to operate the power elevating seat and its swivel feature.
Procedures for charging using onboard or off-board chargers.
Steps to break in new batteries for maximum efficiency and life.
Answers common questions about battery charging, life, and type.
Overview of VSI controller, joystick, keypad, and power on/off.
Reading the battery meter and adjusting speed settings.
Locking the VSI, charger socket, and actuator controls.
Explains thermal rollback and VSI error codes for diagnostics.
Overview of the Remote Plus controller, its functions, and features.
Overview of the Microdrive controller, its functions, and features.
Guidelines for temperature, avoiding water, and proper storage.
Keeping the controller clean and checking electrical connections.
Daily, weekly, monthly, and yearly checks for optimal performance.
Steps for replacing tires or wheel assemblies.
Detailed procedure for replacing power chair batteries.
Details different warranty periods for various components.
Covers what is not covered and how to obtain service.
To Next Page