To Next PageTo Next PageWhy does my Pride Mobility JAZZY 1121 Wheelchair controller have excessive voltage?
If an excessive voltage has been applied to the controller of your Pride Mobility Wheelchair, it's often due to a poor battery connection. Check the battery connections to resolve this issue.
What to do if Pride Mobility Wheelchair is inhibited by the battery charger?
If your Pride Mobility Wheelchair is being inhibited by the battery charger, unplug the battery charger.
General| Weight Capacity | 300 lbs |
|---|---|
| Seat Depth | 16-22" |
| Seat Height | 19.5 inches |
| Rear Casters | 6" Solid |
| Battery Size | NF-22 (2 required) |
| Battery Charger | Off-board |
| Range per Charge | Up to 15 miles |
Key warnings, safe operation, and pre-ride checks.
Weight limits, tyre inflation, inclines, and cornering safety.
Surface conditions, weather, and motor vehicle transport safety.
Battery handling, positioning belts, and EMI precautions.
Information on battery types, charging, and system components.
General guidelines, temperature limits, and daily/weekly checks.
Battery replacement steps and identifying service requirements.
