Need help?Do you have a question about the Pride Mobility Jazzy Select Series and is the answer not in the manual?
General| Brand | Pride Mobility |
|---|---|
| Model | Jazzy Select Series |
| Category | Wheelchair |
| Language | English |
Describes the primary purpose and intended use of the power chair for mobility assistance.
Explains the prescription-based nature of the device and legal restrictions on its sale and use.
Outlines the user's commitment regarding product modification and safety feature maintenance upon delivery.
Provides instructions for checking delivery completeness and reporting any damage incurred during transport.
Details symbols used on the power chair to identify warnings, mandatory, and prohibited actions for safe operation.
Offers general advice and precautions for operating the power chair safely and becoming accustomed to its functions.
Recommends performing a safety check before each use to ensure the power chair operates smoothly and safely.
Introduces the power chair, detailing its main assemblies and key components as depicted in figures.
Explains how to engage and disengage the drive motors using manual freewheel levers for manual maneuvering.
Covers initial assembly requirements, including notes on hardware replacement and seat installation.
Provides step-by-step instructions for installing the seat onto the power base for specific models.
Details the process for installing the power seat onto the Select 6 model using the Universal Mounting System.
Guides users on how to adjust the seat height to one of three positions using manual levers and bolts.
Explains how to adjust the power elevating seat height using the controller and joystick.
Describes how to adjust the seatback angle using a manual recline lever for user comfort.
Details how to set the seatback to specific angles using adjusting screws on limited-recline models.
Provides instructions for independently adjusting the width of each armrest for personalized comfort.
Explains how to adjust the angle of the armrests by loosening a jam nut and turning an adjusting screw.
Guides users on how to adjust the height of the armrests by loosening setscrews.
Covers adjusting the controller's position for left-hand or right-hand use, including extending it.
Details how to adjust the foot platform height in 0.5-inch increments using hardware.
Explains how to adjust the foot platform depth by moving it in or out using hardware.
Guides users on adjusting the angle of the foot platform using an adjustment screw.
Describes how to rotate swing-away footrests to the side for easier transfers onto or off the power chair.
Explains how to adjust the angle and length of the elevating leg rests for customized comfort and support.
Details the installation, adjustment, and release of the positioning belt for operator comfort and support.
Provides essential information about the power chair's deep-cycle batteries and their maintenance-free nature.
Explains the importance of the battery charger and safe practices for charging the power chair's batteries.
Lists the steps required to connect and use the off-board charger to charge the power chair batteries.
Offers a procedure for breaking in new batteries to maximize their efficiency and lifespan through initial charging cycles.
Addresses common questions regarding the charger's operation, battery charging frequency, and battery reminders.
Provides instructions on how to dry and inspect the power chair after water exposure to prevent damage.
Advises on keeping the power chair within specific temperature ranges and notes potential effects on batteries.
Offers general advice for care, including avoiding controller damage, keeping the chair clean, and checking tire inflation.
Lists daily inspection items for the joystick, controller harness, solid tires, and seating system.
Details weekly inspection tasks including checking harnesses, controller security, tire inflation, and brake functionality.
Provides a step-by-step procedure to test the power chair's electric brakes for proper operation.
Outlines monthly checks for anti-tip wheels, drive tires, caster wheels, and overall chair condition.
Recommends professional yearly maintenance to ensure proper function and prevent future issues.
Provides guidance on storing the power chair and its batteries properly to maintain vitality and prevent damage.
Advises on the proper disposal of the power chair and its components according to regulations.
Explains safe methods for cleaning and disinfecting the power chair, including warnings about specific materials.
Details the process for replacing pneumatic or solid tires, emphasizing professional service for wheels.
Provides detailed, step-by-step instructions for safely replacing the power chair batteries, including necessary precautions.
Lists common symptoms that may indicate a serious problem requiring professional service from an authorized provider.
Offers troubleshooting steps for common issues like the battery condition meter not lighting up, including checking connections and circuit breakers.
To Next Page