Why does my Pride Mobility scooter not move when I press the throttle?
If your Pride Mobility scooter does not move when you press the throttle control lever, push down on the manual freewheel lever, turn the scooter off, and then turn the scooter on to return to normal scooter operation.
Why are all the systems on my Pride Mobility scooter dead?
If all systems on your Pride Mobility scooter appear 'dead', ensure the key is in the “on” position. Check that the batteries are fully charged. Push in the main circuit breaker reset button. Make certain both battery harnesses are firmly connected to the rear electronics module and the battery terminals. Ensure the front-to-rear harness is firmly connected to the rear electronics module. Check the 3-amp fuse located on the lower portion of the tiller console. Also, be sure the power down timer feature has not been activated.
What to do if the battery meter dips and motor surges on my Pride Mobility Legend 3-Wheel?
If the battery condition meter dips way down and the motor surges or hesitates when you press the throttle control lever on your Pride Mobility scooter, fully charge the scooter’s batteries. If the issue persists, have your authorized Pride Provider load test each battery.
Why does the main circuit breaker keep tripping on my Pride Mobility Legend 3-Wheel?
If the main circuit breaker repeatedly trips on your Pride Mobility scooter, charge the scooter’s batteries more frequently. If the problem continues, have both of your scooter’s batteries load tested by your authorized Pride Provider. You may also perform the load test yourself. Consult the manual for information about your scooter’s battery type.
How to fix a solenoid brake trip on a Pride Mobility Legend 3-Wheel Scooter?
If the solenoid brake trips on your Pride Mobility scooter, and the manual freewheel lever may be in the freewheel position, remove the key, then push the manual freewheel lever to the drive position, and restart your scooter.
What to do if my Pride Mobility Legend 3-Wheel Scooter has a throttle trip?
If you experience a throttle trip on your Pride Mobility scooter, and the throttle control lever may have been depressed while inserting the key, release the throttle control lever completely, then reinsert the key.
How to resolve a controller trip on a Pride Mobility Legend 3-Wheel?
If you experience a possible controller trip on your Pride Mobility scooter because you may be attempting to install the battery packs while the key is inserted, or the motor controller may be in overheat protective mode, shut down your scooter for a minimum of several minutes to allow the controller to cool. Or, try turning your scooter off, then back on.
How to fix low battery voltage on my Pride Mobility Legend 3-Wheel Scooter?
To address low battery voltage on your Pride Mobility scooter, charge it fully until the charger and any meters indicate completion.
General| Brand | Pride Mobility |
|---|---|
| Model | Legend 3-Wheel Scooter |
| Category | Scooter |
| Language | English |
Provides essential safety advice, including reading the manual, safe operation, and understanding warning symbols.
Explains the meaning and importance of warning and caution symbols used throughout the manual.
Introduces the Pride Legend scooter, emphasizing its features and the importance of safety.
Details benefits of the Pride Owners Club and provides contact information for support.
Covers general warnings, modifications, and safety related to removable parts.
Details pre-ride checks, tire pressure, weight capacity, and incline operation limits.
Covers safe operation on inclines, cornering, surfaces, obstacles, roads, weather, and freewheel mode.
Addresses safety for stairs, doors, batteries, transport, entry/exit, and effects of physical limitations or alcohol.
Explains what EMI/RFI is, its potential effects on mobility scooters, and common sources.
Discusses scooter resistance levels and precautions to prevent interference from radio waves.
Provides diagrams illustrating scooter dimensions and details about front and rear tires.
Lists detailed technical specifications including model, dimensions, weight, speed, range, and accessories.
Details the tiller console layout, key switch, throttle control levers, and speed adjustment dial.
Explains operation of lighting, horn, hazard lights, turn signals, and describes rear section components.
Covers the manual freewheel lever, batteries, anti-tip wheels, and rear fuses.
Explains how to read the battery condition meter and follow safe charging procedures.
Addresses common questions on charging, maintenance, replacement, disposal, break-in, and storage.
Provides step-by-step instructions for safely mounting and dismounting the scooter.
Covers essential pre-ride checks and the fundamental operation of driving the scooter.
Details how to adjust the tiller angle and the front-to-back seat sliding position.
Explains adjustments for seatback recline, armrest angle, and seat height.
Describes the safe operation of the optional power seat for reaching objects.
Outlines the steps required to disassemble the scooter into its main components.
Details the process of separating the front and rear frame sections and reassembling the scooter.
Lists various optional accessories available for the Legend scooter.
Addresses common issues like a dead scooter, no movement, or circuit breaker trips and their solutions.
Covers regular checks for tire pressure, exterior surfaces, battery terminals, and wiring harnesses.
Explains storage procedures, fuse replacement, and rear light bulb replacement.
Details the limited warranty coverage, exceptions, exclusions, and implied warranty limitations.
To Next Page