What to do if my Pride CELEBRITY XL DELUXE Scooter does not move when I engage the throttle control lever?
If your Pride scooter doesn't move when you engage the throttle control lever, it may be due to the manual freewheel lever being pushed forward, which disengages the brakes and cuts power to the motor. To resolve this, push the manual freewheel lever rearward, turn the scooter off, and then turn it back on to return to normal operation.
What to do if the battery condition meter dips way down and the motor surges or hesitates when I engage the throttle control lever on my Pride CELEBRITY XL DELUXE Scooter?
If the battery condition meter dips significantly and the motor surges or hesitates when you engage the throttle on your Pride scooter, fully charge your scooter’s batteries.
What to do if attempting to operate the Pride CELEBRITY XL DELUXE with the charger attached?
If you're trying to use your Pride scooter while it's connected to the charger, turn the scooter key to the off position. Then, switch off the charger, remove the cord from the charger port, and restart your scooter.
What to do if throttle control lever is not at center position at start up on Pride scooter?
If the throttle control lever isn't at the center position when you start your Pride scooter, return the lever to the center, turn the scooter off, and then turn it back on.
What to do if the manual freewheel lever may be in the freewheel (forward) position on Pride CELEBRITY XL DELUXE?
If the manual freewheel lever is in the freewheel (forward) position on your Pride scooter, turn the scooter key to the off position, push the freewheel lever to the drive (rearward) position, and then restart your scooter.
Why all systems on my Pride CELEBRITY XL DELUXE seem to be 'dead'?
If all systems on your Pride scooter appear to be 'dead', check the following: * Ensure the key is in the 'on' position. * Verify the batteries are fully charged. * Push in the main circuit breaker reset button. * Confirm that both battery harnesses and the front-to-rear harness are firmly connected. * Check if the power down timer feature has been activated.
What to do if the controller is hot and the Pride scooter seems to be losing power?
If the controller on your Pride scooter is hot and the scooter seems to be losing power, shut down your scooter for several minutes to allow the controller to cool down.
Details user's promise regarding product modification and safety features upon delivery.
Instructions regarding checking delivery completeness and reporting transport damage.
Encourages user feedback and provides contact details for Pride Mobility Products.
Explains symbols used to identify warnings, mandatory, and prohibited actions.
Mandatory reading, user responsibility, practice, and general tips for safe operation.
Proper tyre inflation and adherence to weight capacity are critical for safety.
Guidelines for safe travel on ramps and inclines, including speed and cornering.
Warnings and instructions for safely navigating obstacles like kerbs.
Precautions for inclement weather and safe use of freewheel mode.
Mandatory battery handling, connection, and charging safety instructions.
Guidelines for safely transporting the scooter in vehicles.
Warnings about operating under the influence and smoking safety.
Information on potential interference from electronic devices and its effects.
Details components and controls on the tiller console.
Explains switches, levers, and dials for controlling scooter speed and functions.
Identifies charger port, fuses, rear section components like batteries and motor.
Instructions for engaging freewheel mode and installing a safety flag bracket.
Information on the main circuit breaker and points for securing the scooter.
How to interpret the battery condition meter for charge status.
Essential steps and safety warnings for charging the scooter's batteries.
Explains voltage switch, LED indicators, and step-by-step charging process.
Answers common questions about chargers, charging frequency, and battery life.
Guidance on recommended battery types and the procedure for changing batteries.
Steps to ensure optimal performance and life for new scooter batteries.
Steps to take before operating, including charging and lever positions.
How to drive the scooter safely, including tiller control and warnings.
How to safely dismount and information on the automatic power-down timer.
How to adjust the tiller angle, console angle, and armrest positions.
Instructions for adjusting the seatback angle and warnings for its use.
Procedures for rotating the seat and adjusting its front-to-back position.
Steps for raising or lowering the scooter seat height.
Detailed steps and safety precautions for operating the optional power seat.
Steps for taking the scooter apart into its main components.
How to disconnect the handbrake and separate the scooter frame sections.
Steps for reassembling the scooter from its separated sections.
Explains beep codes to help diagnose scooter issues quickly.
Addresses common problems like no movement, circuit breaker trips, and battery issues.
Maintenance for tyres, exterior surfaces, and plastic shrouds.
Information on wheel replacement and cleaning/disinfection procedures.
Maintenance checks for wiring, battery terminals, and fuse replacement.
Guidelines for storing the scooter long-term and proper disposal methods.
Details of the two-year and one-year limited warranties.
Items not covered, battery warranty, and service/replacement unit information.
Comprehensive list of the scooter's model number, dimensions, weight, and performance data.
To Next Page
General
