Milford Person Lift www.pridemobility.com 7
OPERATOR POSITIONING
Keep hands clear of the lift arms during motion. The Milford Person Lift is only doing the lifting,
control the lateral movement using the handle on the back of the sling. Stand close to the person being
lifted to be able to safely control their movement, refer to the operating instructions for detailed
guidance.
KEY SAFETY POINTS
WARNING! The purpose of the Milford Person Lift is to transfer a person simply,
safely and with a degree of comfort, from a mobility product to a vehicle or other
seat and
vice versa
. It must not be used for any other purpose.
WARNING! Ensure all straps are set correctly. All metal clips are positively
located on their lugs before lifting. Do not lift/lower at the same time as
transferring the person into and out of the vehicle.
WARNING! Keep hands, clothing and electrical cord of hand control clear of all
moving parts during lifting/lowering operations. The handset can be placed on
top of the lift arm when not in use. Do not use the handset whilst it is attached
to the body of the lift.
WARNING! Avoid catching the handset cord in the car door or moving parts,
resulting in damage to the cord and loss of hoist function.
WARNING! During wet weather avoid getting the electrical connection and
vicinity wet.
WARNING! Never use a system that has signs of damage.
WARNING! Do not exceed maximum lifting capacity.
Your Milford Person lift should be inspected at least every year by a qualified person.
Remember: The Milford Person Lift is only doing the lifting, it does not control the lateral movement
of the lift. The operator MUST ALWAYS keep a hand on the lift to control the lateral movement of the
person being transferred. Failure to do so may result in injury.
To Next Page
Loading...
