Need help?Do you have a question about the PrimaLuna ProLogue One and is the answer not in the manual?
General| Type | Integrated Tube Amplifier |
|---|---|
| Tube Complement | 4 x EL34, 2 x 12AX7, 2 x 12AU7 |
| Output Power | 35 watts per channel |
| Inputs | 4 x RCA |
| Signal-to-Noise Ratio | 90 dB |
| THD | Less than 1% |
| Total Harmonic Distortion | Less than 1% |
| Input Impedance | 100 kOhm |
| Speaker Taps | 4 & 8 Ohms |
| Output Impedance | 4Ω, 8Ω |
| Outputs | Speaker terminals |
| Output Power (Ultra Linear) | 35W per channel |
| Output Power (Triode) | 18W per channel |
Describes the controls and indicators on the front panel of the amplifier.
Details the input jacks and speaker output terminals on the rear panel.
Lists compatible replacement tubes for the amplifier's various sockets.
Details the location and replacement procedure for the internal plate fuse.
Explains how to locate and replace the main fuse on the rear panel.
Outlines the terms, limitations, and conditions of the product warranty.
To Next Page
