Do you have a question about the PrimaLuna ProLogue Premium and is the answer not in the manual?
Specifies the duration of the limited warranty for the product.
Details the specific warranty period for vacuum tubes included.
Outlines the conditions, limitations, remedies, and legal aspects of the warranty.
Addresses problems like no output, power LED off, or tubes not lighting up.
Diagnoses and resolves noise or hum originating from one or both channels.
Provides steps to troubleshoot a non-functional remote control.
Instructions for integrating the amplifier with a home theater processor.
Information about the optional internal phono stage and its installation.
Crucial warnings to prevent injury, shock, or fire during operation.
Lists all items included in the product packaging.
Step-by-step guide for the initial setup and connection of the amplifier.
Description of the controls and indicators on the amplifier's front panel.
Details the input and output connectors on the rear of the amplifier.
Explanation of PrimaLuna's tube selection process and quality standards.
Guide on using the bias switch for different tube types.
Information on tube life expectancy and general handling advice.
Lists compatible replacement tubes for the amplifier.
Instructions for using the remote control and troubleshooting.
Details the automatic bias adjustment circuit for improved performance.
Explains the soft-start feature for component longevity.
Describes the LED system for indicating faulty tubes.
Information on the thermal protection for the power transformer.
Details the protection circuit for the output transformers.
Guidance on fuse types, ratings, and safe replacement procedures.
| Type | Tube Integrated Amplifier |
|---|---|
| Input Impedance | 100k Ohms |
| Total Harmonic Distortion | Less than 1% |
| Inputs | 4 x RCA |
| Outputs | 4, 8 Ohm speaker taps |
| Tube Complement | 4x EL34, 2x 12AU7, 2x 12AX7 |
| Input Sensitivity | 300mV (line inputs) |
Loading...