Primare CD32 - Using the CD32; Front Panel Controls; Playing a Disc; Locating a Position on the Disc

              

          
       
Standby O
Switches the CD32 to standby, or switches it on
from standby.
Stop/Open */å
When the disc is playing: pauses the disc.
When the disc is paused: stops the disc.
When the disc is stopped: opens or closes the
CD tray.
Press and hold: opens the CD tray.
Play/Skip >/]
When the disc is stopped: plays the disc.
When the disc is playing: skips to the next track.
Press and hold: skips back through the tracks.
             
To insert a disc
•
Press the */å button on the front panel, or
on the remote control, to open the tray.
•
Place the CD in the tray with the label facing
upwards.
•
Press the */å button again to close the tray
(or press the > button).
The display shows:
READING
followed by the number of tracks and total time:
19
74:59
To play the disc
•
Press the > button on the front panel, or the
>/= button on the remote control.
While a disc is playing the display shows the
current track number and the elapsed time of the
current track; for example:
7
1:24
To pause the disc
•
Press the */å button on the front panel or
the remote control while the disc is playing.
The display shows the pause symbol:
=
You can then resume play by pressing the >/]
button on the front panel or the >/= button on
the remote control.
To stop play
•
Press the */å button on the front panel or
the remote control.
                  
          
You can skip between tracks to locate a particular
track on the disc, or you can scan forwards or
backwards to locate a position within a track.
To skip forwards through the tracks
•
Press the >/] button on the front panel, or
press the ] button on the remote control.
To skip back through the tracks
•
Press and hold the >/] button on the front
panel, or press the [ button on the remote
control.
The front panel display shows the track number:
12
•
Release the button to start playing the
selected track from the beginning.
To scan through the disc
•
Press the ¯ or ˘ button on the remote
control once to scan at 4X speed, or twice to
scan at 8X speed.
The display shows the position within the track.
•
Press the > button on the front panel, or the
>/= button on the remote control to start
playing from the position you have located.

This page explains how to operate your CD32, using the functions available from
either the front panel or the C32 remote control.