Need help?Do you have a question about the Primare CD32 and is the answer not in the manual?
Lists the components supplied with the CD32 player.
Details connecting the CD32's analogue and digital outputs to an amplifier.
Explains how to connect the mains cable and power on the CD32.
Guides on inserting a CD and starting playback.
Describes the functions of the CD32's front panel buttons.
Explains how to insert, play, pause, and stop a CD.
Details skipping tracks and scanning within a disc.
Instructions for inserting batteries into the remote control.
How to change the time display format and brightness.
How to repeat the current track or the entire disc.
How to play tracks in random order.
How to select and play a specific track by number.
Explanation of upsampling options for improved audio quality.
How to create a custom playback sequence of tracks on a CD.
How to initiate playback of a programmed track sequence.
How to navigate and select music files and folders on a connected USB disk.
How to play selected music files from a USB disk.
Importance of AC supply phase for sound quality.
Notes on initial audio performance improvement over time.
Info on connecting to controller systems and trigger functions.
How to configure trigger and remote control input settings.
Essential warnings for safe installation and operation of the appliance.
Precautions regarding electrical shock, grounding, and power sources.
Guidelines for ventilation, cleaning, and servicing safety.
General| Type | CD Player |
|---|---|
| DAC | Burr-Brown PCM1704 |
| Output Impedance | 100 ohms |
| Power Consumption | 15 W |
| Digital Outputs | Coaxial |
| Analog Outputs | RCA |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | 100 dB |
| Total Harmonic Distortion | <0.01% |
| Dimensions (WxDxH) | 430 x 385 x 106 mm |
| Output Voltage | 2.0V |
To Next Page
