This chapter explains how to use the more advanced features of the CD32, and
how to play audio files from a USB disk. These functions are accessed from the
remote control.
You can choose how the time is shown on the
front panel display, and change the brightness.
To change the time display
•
Press the DISP button..
The display switches between the following four
options:
Elapsed time for the current track
3:45
Remaining time for the current track
1:15 RT
Elapsed time for the entire disc
ALL 18:45
Remaining time for the entire disc
ALL 41:15 RT
To change the front panel display brightness
•
Press the DIM button to step through the
three levels of illumination and blank.
The display auto-dims after a few seconds and
returns to the selected brightness when you
operate any control.
You can play the current track repeatedly, or
repeat the entire disc.
To repeat the current track
While the disc is playing:
•
Press the REPEAT button.
The front panel shows the symbol and TRK.
To repeat the entire disc
•
Press the REPEAT button twice.
The front panel shows the symbol and ALL.
To turn off repeat
•
Press the REPEAT button again.
The symbol in the display will be cleared.
Shuffle playback plays the tracks on the disk in
random order.
To play the tracks in random order
While the disc is playing:
•
Press the blue B button.
The front panel shows the symbol:
In shuffle mode you can pause a track by pressing
the >/= button or skip a track by pressing the ]
button.
To turn off shuffle
•
Press the blue B button again.
The symbol in the display will be cleared.
You can play from any track by entering the track
number on the remote control.
To play from a specific track
•
Specify the track number by pressing one of
the buttons 1-9.
To enter a two-digit track number press the +10
button first. For example, to enter 16 press the
+10 button followed by the 1 and 6 buttons.
The CD32 allows you to upsample the 44.1kHz
signal from a CD to either 48kHz or 96kHz, which
improves fine detail, sound stage depth and image
separation.
•
Press the red R button to select between
44.1K, 48K, and 96K (recommended).
To Next Page
Loading...
