CD35 Compact Disc Player User Guide10
Front panel controls
Standby O
Switches the CD35 to standby, or switches it on from
standby.
Play/Skip >/]
When the disc is stopped: plays the disc.
When the disc is playing: skips to the next track.
Press and hold: skips back through the tracks.
Stop/Open */å
When the disc is playing: pauses the disc.
When the disc is paused: stops the disc.
When the disc is stopped: opens or closes the CD tray.
Press and hold: opens the CD tray.
Settings menus
Pressing >/] and */å simultaneously displays the
settings menus or exits from the menus.
In the settings menus:
Pressing >/] or */å steps between the settings.
Holding down >/] selects a setting or saves an edited
setting.
Holding down */å navigates back or cancels editing a
setting.
Playing a disc
To insert a disc
Press and hold the */å button on the front panel, or
on the remote control, to open the tray.
Place the CD in the tray with the label facing upwards.
Press the */å button again to close the tray (or press
the > button).
The display shows:
READING
followed by the number of tracks and total time:
19
74:59
To play the disc
Press the >/] button on the front panel, or the >=
button on the remote control.
While a disc is playing the display shows the current
track number and the elapsed time of the current track; for
example:
7
1:24
To pause the disc
Press the */å button on the front panel, or the >=
button on the remote control, while the disc is playing.
The display shows the pause symbol:
=
You can then resume play by pressing the >/] button on
the front panel or the >= button on the remote control.
To stop play
Press the */å button on the front panel or the remote
control.
l
l
l
l
l
l
Locating a position on the disc
You can step between tracks to locate a particular track
on the disc, or you can scan forwards or backwards to
locate a position within a track.
To step forwards through the tracks
Press the >/] button on the front panel, or press the
] button on the remote control.
To step back through the tracks
Press and hold the >/] button on the front panel, or
press the [ button on the remote control.
The front panel display shows the track number:
12
Release the button to start playing the selected track
from the beginning.
To scan through the disc
Hold down the [ or ] button on the remote control to
scan at 4X speed.
The display shows the position within the track.
Release the [ or ] button to start playing from the
position you have located
l
l
l
l
l
USING THE CD35
To Next Page
Loading...
