Primare I22 User Manual

Primare AB • Renvägen 1 • SE-35245 Växjö • Sweden • Tel +46 470 729215 • www.primare.net
I22 DAC-upgrade
Content of the upgrade:
- DAC-Board
- 2 cables
- 2 transistor heat sinks
1. Switch OFF the I22 and disconnect AC-cable.
2. Open top cover of the I22.
3. Unscrew back plate off the I22. (4 screws)
4. Install both cables on audio board. (see picture RED arrows)
5. Install DAC board using the 4 screws from the back plate.

Primare I22 Specifications

General

Brand	Primare
Model	I22
Category	Media Converter
Language	English

Summary

Primare I22 DAC Upgrade

Physical Installation Procedure

Steps for powering down, opening the I22, and physically installing the DAC board and cables.

Connecting DAC Board and Heat Sinks

Instructions on connecting cables to the DAC board and installing transistor heat sinks.

Software Configuration for DAC Mode

Guide to closing the unit, powering on, and setting the I22 software to DAC mode.