Instructions for use PRIMEDIC
™
Defi-Monitor ECO 1 / DM 1 / DM 3
19499 / 05.03 59
Table of contents Page
1. Safety instructions 61
2. Device specification 63
3. Preliminary measures 71
3.1 Accumulator charging 71
3.2 Configuration of the defibrillator / ECG monitor (set-up menu) 72
4. Operation of the defibrillator 73
4.1 Switching the defibrillator on and off / self-test 73
4.2 Synchronous and asynchronous operation 74
4.3 Energy selection 75
4.4 Energy charging 75
4.5 Positioning of paddles 76
4.6 Discharging of energy (shock) 76
4.7 Paediatric paddles 77
5. Operation of the ECG monitor 78
5.1 Selection of ECG leads 78
5.2 Setting of signal amplification 79
5.3 Volume of systole beep 79
5.4 Activation of heartrate alarms 79
5.5 Contrast-Settings (only for ECO 1) 80
5.6 Filter 80
5.7 Positioning of ECG electrodes 81
6. Operation of SpO
2
monitor (only model DM 3) 82
6.1 Connection of SpO
2
sensor 82
6.2 Selection of correct SpO
2
sensor 83
6.3 Setting of alarms for SpO
2
84
7. Operation of printer 86
7.1 Protocol of the ECG signal 86
7.2 Automatic printout after every shock (auto print) 87
7.3 Printing of the event memory 88
7.4 Insertion of printing paper 89
8. Handling of the charging unit 89
9. Handling of the changeable accumulator 90
9.1 Changing of the accumulators 91
9.2 Parallel accumulator charging in the charging unit 91
10. Maintenance and care 92
11. Waste Treatment 93
12. Technical data, accessories, symbols 94
12.1 Technical data PRIMEDIC™ Defi-Monitor ECO 1 / DM 1 / DM 3 94
12.2 Accessories 96
12.3 Symbols 97
To Next Page
Need help?
General
